Liquid structure of room-temperature ionic liquid, 1-Ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide

The liquid structure of 1-ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide (EMI(+)TFSI(-)) has been studied by means of large-angle X-ray scattering (LAXS), (1)H, (13)C, and (19)F NMR, and molecular dynamics (MD) simulations. LAXS measurements show that the ionic liquid is highly structured with intermolecular interactions at around 6, 9, and 15 A. The intermolecular interactions at around 6, 9, and 15 A are ascribed, on the basis of the MD simulation, to the nearest neighbor EMI(+)...TFSI(-) interaction, the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions, and the second neighbor EMI+...TFSI(-) interaction, respectively. The ionic liquid involves two conformers, C(1) (cis) and C(2) (trans), for TFSI(-), and two conformers, planar cis and nonplanar staggered, for EMI(+), and thus the system involves four types of the EMI(+)...TFSI(-) interactions in the liquid state by taking into account the conformers. However, the EMI(+)...TFSI(-) interaction is not largely different for all combinations of the conformers. The same applies alsoto the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions. It is suggested from the 13C NMR that the imidazolium C(2) proton of EMI(+) strongly interacts with the O atom of the -SO(2)(CF(3)) group of TFSI(-). The interaction is not ascribed to hydrogen-bonding, according to the MD simulation. It is shown that the liquid structure is significantly different from the layered crystal structure that involves only the nonplanar staggered EMI(+) and C(1) TFSI(-) conformers.     

Shear-thickening flow of nanoparticle suspensions flocculated by polymer bridging

The steady-shear viscosity, dynamic viscoelasticity, and stress relaxation behavior were measured for suspensions of silica nanoparticles dispersed in aqueous solutions of poly(ethylene oxide) (PEO). The suspensions of silica with diameters of 8-25 nm show striking shear-thickening profiles in steady shear and highly elastic responses under large strains in oscillatory shear. Since the silica particles are much smaller than the polymer coils, one molecule can extend through several particles by intrachain bridging. Each polymer coil may remain isolated as a floc unit and the silica particles hardly connect two flocs. Therefore, the flow of suspensions is Newtonian with low viscosity at low shear rates. When the polymer coils containing several nanoparticles are subjected to high shear fields, three-dimensional network is developed over the system. The shear-thickening flow may arise from the elastic forces of extended bridges. But, the polymer chain is easily detached from particle surface by thermal energy because of large curvature of particles. As a result, the network structures are reversibly broken down in a quiescent state and the suspensions behaves as viscoelastic fluids with the zero-shear viscosity.     

Preparation of pH-sensitive liposomes retaining SOD mimic and their anticancer effect

We prepared an anticancer drug based on a pH-sensitive liposome retaining Fe-porphyrin as an SOD mimic. The liposomes contained cationic/anionic lipid combinations and were composed of Fe-porphyrin, 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine, dimethylditetradecylammonium bromide, sodium oleate, and Tween-80. The Fe-porphyrin was released from the liposome at low pH, and the cytotoxicity for cancer cells by the liposome depended on the acidic environments of the endosomes in the cells. Furthermore, although the liposome exhibited an excellent anticancer effect on a gastric cancer cell line, the SOD activity of Fe-porphyrin was shown to have a significant influence on the cytotoxicity toward cancer cells. These findings suggest that the pH-sensitive liposome retaining the Fe-porphyrin as an SOD mimic promises to be a novel anticancer drug for endosomal escape.     

Synthesis and absolute structure of manzacidin B

[reaction: see text] Four possible stereoisomers of manzacidin B were synthesized using stereochemically defined synthetic routes via the azide 7 and oxazoline 11 starting with the (R)-alpha-methyl Garner aldehyde 5. Comparisons of the spectroscopic data of the synthetic isomers 4a-d with those of the natural manzacidin B revised the proposed structure 3 to (4S,5S,6R)-4d.     

Salt effect on bilayer phase transitions of dipalmitoylphosphatidylglycerol in saline water under high pressure

ABSTRACT

The phase transitions of dipalmitoylphosphatidylglycerol (DPPG) bilayer membrane at high NaCl concentrations under high pressure were investigated to construct the temperature–pressure phase diagram and to determine phase-transition properties. The constructed phase diagrams exhibited qualitative resemblance to that of the dipalmitoylphosphatidylcholine (DPPC) bilayer membrane: they showed the gel-phase polymorphism including the pressure-induced bilayer interdigitation. The phase-transition properties of the DPPG bilayer membrane changed in a salt concentration-dependent manner. We discussed the salt effect on the DPPG bilayer membrane from the variation in interactions between the polar head groups of the PG molecules.     

AC susceptibility of magnetic markers in suspension for liquid phase immunoassay

AC susceptibility of magnetic markers in solution was studied for biosensor applications. First, frequency dependence of the susceptibility was measured, and size distribution of the markers was estimated by analyzing the experimental result with the so-called singular value decomposition (SVD) method. The size distribution estimated with the magnetic measurement agreed with that obtained from conventional optical measurement. Next, susceptibility measurement was applied to the liquid-phase immunoassay without bound/free (B/F) separation. We performed the detection of biotin-coated polymer beads in suspension using avidin-coated magnetic markers. Changes of the susceptibility and the size distribution caused by the binding reaction were shown.     

The first total synthesis of prianosin B

The first asymmetric total synthesis of prianosin B (1) is described. Formation of the 16,17-dehydropyrroloiminoquinone skeleton from the pyrroloiminoquinone unit is a key step in this synthesis. Thus, the detosylation and dehydrogenation reactions of the pyrroloiminoquinone unit are caused by the presence of a catalytic amount of NaN₃.     

The efficient direct synthesis of N,O-acetal compounds as key intermediates of discorhabdin A: oxidative fragmentation reaction of alpha-amino acids or beta-amino alcohols by using hypervalent iodine(III) reagents

Hypervalent iodine(III) reagents are readily available, easy to handle, and have a low toxicity and similar reactivities to those of heavy metal reagents, and hence they are used for various oxidative reactions. The oxidative cleavage of alkynes or carbonyl compounds by using bis(trifluoroacetoxy)iodo(III) pentafluorobenzene (C(6)F(5)I(OCOCF(3))(2)) has been reported. Herein, the efficient direct synthesis of N,O-acetal compounds as key intermediates of discorhabdin A, by the oxidative fragmentation reaction of alpha-amino acids or beta-amino alcohols by using C(6)F(5)I(OCOCF(3))(2), is described.     

Surface functionalization of mesoporous and microporous activated carbons by immobilization of diamine

The introduction of amino groups on HNO3-treated microporous (AC(micro)-At) and mesoporous (AC(meso)-At) activated carbon, which was followed by thionyl chloride (SOCl2) treatment, by immobilization of diamine compounds was investigated in terms of change in pore characteristics. The immobilization was improved by treatment with SOCl2. The BET surface area of AC(micro)-At largely decreased by immobilization of ethylenediamine (EDA) and hexamethylenediamine (HMDA). Decreases in BET surface area and pore volume of AC(meso)-At by immobilization of EDA and HMDA were scarcely observed. These results suggest that amino groups introduced to mesoporous activated carbon are effective as functional groups for additional reactions.     

Effects of dioctadecyl dimethyl ammonium chloride on the rheological behavior of behenyl trimethyl ammonium chloride/1-hexadecanol/water ternary system

The effects of dioctadecyl dimethyl ammonium chloride (DODAC) on the rheological properties of ternary systems consisting of behenyl trimethyl ammonium chloride (C22TAC), 1-hexadecanol (C16OH), and water are studied to improve the long-term stability and to establish the preparation method of cosmetic products. The basic ternary systems behave as solids at low stresses, due to the formation of lamella liquid crystals called alpha gel. The additions of DODAC to ternary systems cause the rupture of alpha gel structures and transformation to vesicles. The structures of molecular assemblies are confirmed through particle size distribution, differential scanning calorimetry, and freeze fracture electron microscopy. The vesicle structures formed in coexistence of single-chain surfactant and double-chain surfactant are highly stable. Because the quaternary systems are considered to be constructed by the mixtures of alpha gel and vesicles at the appropriate concentrations of DODAC, the rheology can be controlled by the structural balance between them.